Killarney (SDU)

Primary 2795 SQ FT | 4 Bed | 2.5 Bath |

Secondary 900 SQ FT | 1 Bed | 1 Bath |

Contemporary

Craftsman

Secondary Dwelling Unit (SDU)

Inside Series

An attached secondary dwelling unit is a self-contained living space within a primary home. Complete with its own kitchen, bathroom, and bedroom, it offers flexible living for family, guests, or rental income potential.

Primary

2795
4
2.5

Secondary

900
1
1

Download Floor Plan

ADDITIONAL FEATURES TO THE STANDARD SINGLE FAMILY HOME SPECIFICATION

• Upgrade main unit to 200 AMP ELECTRICAL SERVICE.
• Upgrade to 8′-10″ pour height for Basement foundation walls.
• Supply and install exterior rear entry to SDU c/w concrete steps and landing, aluminum railing / handrail and exterior door.
• Supply and install wall mounted exterior light fixture c/w switch at SDU Entry.
• Supply and install mailbox and block civic address numbers at SDU Entry.
• Supply and install one (1) additional basement window (3 total), lower windows 12″ from top of foundation.
• Isolate main unit from SDU with 1hr fire rated wall & ceiling assemblies.
• Supply and install dedicated SDU mechanical room c/w 100A pony panel connected to main unit electrical panel, rental tankless water heater, furnace, HRV and air conditioner line set rough-in, stackable laundry hook-ups and builder’s standard laundry tub.
• Supply and install 3-piece SDU Bath #1 with toilet, vanity with 3/4″ quartz countertop and 3×4 shower with acrylic base, ceramic flooring c/w DITRA underlay & one (1) pot light above shower.
• Supply and install SDU Kitchen c/w builder’s standard upper and lower cabinets, 3/4″ quartz countertop and backsplash tile, undermount sink and kitchen faucet, chimney hood fan, microwave base cabinet, pot lights and vinyl plank flooring.
• Supply and install SDU Foyer including closet c/w ceramic flooring with DITRA underlay.
• Supply and install SDU Living/Dining c/w vinyl plank flooring.
• Supply and install SDU Primary Bedroom including closet c/w carpet flooring.
• Supply and install two (2) CAT6 Network outlets and one (1) CAT6 wire connection between main unit and SDU.
• Supply and install bulkheads as required to accommodate mechanical.